Description
Overview
EASYJoint is the original sweep-in jointing Compound and still the best truly “All Weather Paving Joint Compound” available and made in the UK. Do not be fooled by others making similar claims. This #1 product is sold across the world and is favoured by professional and DIY installers.
EASYJoint is a very quick, effective, and aesthetically pleasing way to fill joints between paving, be it natural stone or concrete flags. It is suitable for all types of paving material provided there is a gap of at least 3mm wide and 20mm deep.
As the name implies, EASYJoint is easy to use – simply soak the paving with water before commencing and then simultaneously sweep and wash the jointing compound into the joints, letting the water take the strain. Full instructions on how to joint paving and a demonstration video showing how to joint a patio can be found on this web site. If you cannot find what you are looking for on the Azpects site and need help on how to joint a patio or need any assistance with choosing the right hard landscaping product or how to use an EASY Range product, call our dedicated hard landscaping helpline where our trained staff will assist you.
The result of using EASYJoint, to joint your paving, will be a paving gap that is completely filled without the need for kneeling and compressing the material by hand that will last for years. A strong joint that will resist the elements and stand the test of time – better than traditional jointing methods.
Advice for using EASYJoint in colder conditions
Here is our guide to using EASYJoint and EASYGrout in colder conditions
EASYJoint can be used in cold conditions, including just below freezing, provided there is no ice in the joints and the temperatures is rising above freezing.
EASYJoint will take longer to cure in very cold conditions, but it will cure eventually. If you must install in cold conditions, you can use EASYJoint as a dry mix (without water) if the temperature is below 3 degrees Celsius and rising. If the temperature is below 3 degrees Celsius and falling, wait for conditions to improve.
When applying without water, the risk of residue staining is much higher, so apply EASYJoint directly to the joints and strike the joints to aid compaction. Avoid spreading EASYJoint across the surface of the pavement when applying as a dry mix.
It is best practice to ensure that ground temperatures are greater than 3 degrees Celsius and use plenty of water during EASYJoint installation.
