Sharpie marker pens | Black | 2 Pack
Sharpie marker pens | Black | 2 Pack
Sharpie Fine Tip Permanent Marker will write on most surfaces and has a 1mm tip. It is ideal for everyday use at home, on the job site, etc.
The high-quality ink dries quickly and resists both fading and water.
Bucket on Clip On Plate | 50x50mm | 2″x2″ Galv
Bucket on Clip On Plate | 50x50mm | 2″x2″ Galv
This pack comes with all fixings required to install this bucket clip on plate anywhere outside. These have a large variety of uses and are commonly used with any length of chain and rope. The clip allows for chain to be easily taken on and off. This ring on plate is galvanised for extra durability.
Carpenter’s Mallet 100mm (4in)
Carpenter’s Mallet 100mm (4in)
The Faithfull Classic Tapered Mortice Pattern Mallets for general joinery work.
Made from straight grained beech to provide the required weight and resistance against splitting.
The morticed head and tapered handle maintain a perfect and secure fit.
The striking surfaces of the head are angled toward the user and ensure a square-on delivery with each blow.
Size: 100mm (4in)
Weight: 430g
Carpenters Pencil | 180mm
Carpenters Pencil | 180mm
Broad design for easy grip and wider marking on rough surfaces.
Carpenters Plane & Square Set
Carpenters Plane & Square Set
This Faithfull Plane Set comes in a wooden storage box and provides the essentials you need for planing wood:
1 x No.4 Smoothing Plane, designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools.
Cutter Width: 50mm.
Overall Length: 250mm.
1 x No.60 1/2 Block Plane with plane iron set at 13.5°. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single-handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain.
Cutter Width: 35mm.
Overall Length: 160mm.
Chain Lubricant | 380ml
Chain Lubricant | 380ml
TIMCO chain lubricant is designed to penetrate maintain, protect and clean chain, wire rope and moving metal parts. The high viscosity formula gives excellent lubricant retention, preventing “fling off” and unnecessary wear and maintenance.
• The Molybdenum disulfide additive gives exceptional long lasting friction reduction
• Prolongs the performance and lifespan of moving metal parts and surfaces
• Prevents corrosion and reduces dirt and grime build up, even in wet and humid environments
Timber Index Landscaping Screw | Hex Head | Exterior Green
Timber Index Landscaping Screw | Hex Head | Exterior Green
Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating, this screw is ideal for outdoor applications.
Ideal for connecting sleepers to make raised beds etc
https://vimeo.com/755591178
Coach Screw | Zinc
Coach Screw | Zinc
A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber …
C2 Decking Fix Premium Decking Screws | TX | Countersunk | Exterior Green
C2 Decking Fix Premium Decking Screws | TX | Countersunk | Exterior Green
A premium decking screw using the C2 twin-cut technology. Coated with a patented multi-layer corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabinet. This new and innovative design enables the screw to rapidly penetrate the timber, cleanly countersink and securely clamp the decking board to the joists.
• Strengthened head to prevent shearing when installed with an impact tool
• Ribs under the head for improved countersinking
• Helix shank for removing debris and to improve clamping
• Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray
• Patented twin cut technology for rapid “pick-up” and reduces timber splitting
https://vimeo.com/746885275
Carriage Bolt & Nut | Zinc
Carriage Bolt & Nut | Zinc
A domed head bolt with a square anti spin shoulder mainly used for clamping timber or attaching ironmongery to timber. Fully threaded up to and including 150mm. Partially threaded thereafter. Zinc plated.
Composite Decking Plastic Fixing Clip | 100 Pack
Composite Decking Plastic Fixing Clip | 100 Pack
You need to use one decking fixing clip on each joist, to secure your decking.
The clips are designed to allow the decking to move slightly when it expands and contracts in the heat, and you should always allow a minimum of 10mm at each end of your decking lengths, plus 10mm at the start and finish of the installation.
You will need approximately 20 clips per square metre of decking.
Composite Decking Stainless Steel Starter Clip | 20 Pack
Composite Decking Stainless Steel Starter Clip | 20 Pack
These Decking Stainless Steel Starter Clips can be used with Triton WPC Decking.
This clip has the following dimensions: 27mm (L) x 24mm (W) x 10mm (T).
WPC (Wood Plastic Composite) decking is an alternative decking product made from wood-plastic composites, a unique composition that replicates wood without the maintenance of traditional timber decking.
